PWT200
PWT200
Reference: 106441
Sizes: 36-47
Normative: EN ISO 20347:2022 O7S+SR+CI+HI+HRO+FO+SC
Description: Water resistant textile boot with micro-injections. Gore-Tex® lining, Rubber Vibram® sole injected by a middle polyurethane layer. Slip resistance level SRC.
Upper: Three layers: Water-resistant Polyester + polyurethane reinforcements + polyamide microfibers.
Collar Lining: high breathability and abrasion resistance lining. Foamed.
Internal Lining: Gore-Tex membrane, waterproof and breathable. High abrasion resistance.
Removable Insole: Anatomic preformed, with antibacterial treatment. It allows 30º washing and it is abrasion resistant.
Sole: Rubber Vibram® sole injected by a middle polyurethane layer. Slip resistance level SRC.
Protective Insole: Non-metallic penetration resistant insole (High Tenacity Polyester).
Closing System: Water resistant Laces.
HEAT RESISTANCE OF SOLE
On contact: up to 300ºC during 1 minute.
CLOSED BUTTRESS
PERFORATION RESISTANCE
ENERGY ABSORPTION OF HEEL
Up to 20J.
SLIP RESISTANCE
SRA. on tile (heel ≥0.28, plano ≥0.32). SRB on steel (heell ≥0.13, plano ≥0.18). SRC on tile and steel.
WATER RESISTANCE
Of whole footwear.
INSULATION OF SOLE AGAINST COLD
ELECTROSTATIC CHARGES
Material and structure allowing dissipation of electrostatic charges: resistance between 0.1 MW and 1.000MW.
ISULATION OF SOLE AGAINST HEAT
RESISTANT TO WATER PENETRATION AND ABSORPION
On the upper.
HEAT RESISTANCE OF SOLE
On contact: up to 300ºC during 1 minute.
CLOSED BUTTRESS
PERFORATION RESISTANCE
ENERGY ABSORPTION OF HEEL
Up to 20J.
SLIP RESISTANCE
SRA. on tile (heel ≥0.28, plano ≥0.32). SRB on steel (heell ≥0.13, plano ≥0.18). SRC on tile and steel.
WATER RESISTANCE
Of whole footwear.
INSULATION OF SOLE AGAINST COLD
ELECTROSTATIC CHARGES
Material and structure allowing dissipation of electrostatic charges: resistance between 0.1 MW and 1.000MW.
ISULATION OF SOLE AGAINST HEAT
RESISTANT TO WATER PENETRATION AND ABSORPION
On the upper.
