HR8000
HR8000
Reference: 249641
Sizes: 37-46
Normative: EN-ISO 20345:2011 S3+SRC+HI+CI+HRO
Description: Leather boots. Vincap non-metallic toe cap. Textile puncture resistant insole. Polyurethane midsole. SRC slip resistant nitrile rubber sole.
Upper: Engraved leather, hydrofugated.
Collar Lining: Nappa leather.
Lining: Cambrelle: breathable and very abrasion resistant lining.
Inner Insole: Anatomic preformed with antibacterial treatment. It allows 30º washing and it is abrasion resistant.
Outsole: Nitrile rubber with polyurethane inner layer, with anti-slip reliefs.
Toe Cap: Composite (Light, non-magnetic, thermally isolated, recovers form after normative impact).
Protective Insole: Non-metallic penetration resistant insole (High Tenacity Polyester).
TOECAP RESISTANT
To impacts, of an energy up to 200 J and with a compression strength of 15 KN.
CLOSED BUTTRESS
PERFORATION RESISTANCE
ENERGY ABSORPTION OF HEEL
Up to 20J.
ISULATION OF SOLE AGAINST HEAT
SLIP RESISTANCE
SRA. on tile (heel ≥0.28, plano ≥0.32). SRB on steel (heell ≥0.13, plano ≥0.18). SRC on tile and steel.
INSULATION OF SOLE AGAINST COLD
ELECTROSTATIC CHARGES
Material and structure allowing dissipation of electrostatic charges: resistance between 0.1 MW and 1.000MW.
HEAT RESISTANCE OF SOLE
On contact: up to 300ºC during 1 minute.
HYDROCARBON RESISTANT SOLE
RESISTANT TO WATER PENETRATION AND ABSORPION
On the upper.
TOECAP RESISTANT
To impacts, of an energy up to 200 J and with a compression strength of 15 KN.
CLOSED BUTTRESS
PERFORATION RESISTANCE
ENERGY ABSORPTION OF HEEL
Up to 20J.
ISULATION OF SOLE AGAINST HEAT
SLIP RESISTANCE
SRA. on tile (heel ≥0.28, plano ≥0.32). SRB on steel (heell ≥0.13, plano ≥0.18). SRC on tile and steel.
INSULATION OF SOLE AGAINST COLD
ELECTROSTATIC CHARGES
Material and structure allowing dissipation of electrostatic charges: resistance between 0.1 MW and 1.000MW.
HEAT RESISTANCE OF SOLE
On contact: up to 300ºC during 1 minute.
HYDROCARBON RESISTANT SOLE
RESISTANT TO WATER PENETRATION AND ABSORPION
On the upper.
